Superconductor RSS

New product, Store news, Superconductor -

Now it was time to start sanding. I started by sanding away all the extra superconductor until the edges of the ring sat flush together. After this was over, I then started trimming everything down until it was the exact dimensions I wanted. One thing to note, because this is a composite material where we have the superconductor infused with the copper, you can have issues where the superconductor itself will smear into the copper. So, you want to be careful with the final passes you do with your bit. This is why I used a brand new very sharp bit. I then added bevoles to the ring with the angled side of my bit. The next thing I did, was sand down the inside of the ring. To do this, I started with a 220 grit and worked my way up to a 2000 grit. I did this to both the inside of the ring and the outside of the ring. I then polished the inside of the ring until it was a perfect mirror inside.

Read more

New product, Store news, Superconductor -

This week, we are happy to announce our newest product addition to Patrick Adair Designs: Tilted Superconductor. While normal superconductor features stripes of titanium neobium that run parallel to the finger, the tilted superconductor features stripes that are, well, tilted (shown below).   Tilted superconductor won't be listed as its own product; rather, it will be an option on our normal superconductor rings that is selected with a checkbox. Now this option will cost more money (but fret not as there is a coupon for them listed below), and the reason is two fold. The first reason is that it...

Read more

Tags